Use this cable to connect your DC powered devices to your Strom Mobile! This is a standard DC cable, that doesn’t change the polarity of your signal. The length of the cable is 100 cm and comes with a 2.1mm barrel connector on both ends.
This is a special bundle of the KOMA Field Kit series! Use the Field Kit to capture and create sounds and use the Field Kit FX to mangle them into brand new sounds. For the experimental-curious, hardcore noisers and people who are into science (and vision). This special bundle consists of:
- Field Kit + Manual + 9V PSU
- Field Kit FX + Manual + 9V PSU
- Field Kit Expansion Pack
- Field Kit FX Pack
With a nice little discount!
AVAILABLE FROM STOCK!
Our latest machine the Field Kit FX has been funded through the community at Kickstarter and is now available for order here on the KOMA website. The Field Kit FX is more fun with the right tools! You could add the FX Expansion Pack, which offers a spring reverb tank and other goodies!
This is the Eurorack version. For the boxed version go here.
The Field Kit FX is a super versatile effects unit! It boasts a Frequency Shifter, Looper, Spring Reverb, Digital Delay, Bit Crusher, 4 Channel Mixer with VCA’s and tone control, a mini sequencer and ADSR, all under CV control! The Field Kit FX is more fun with the right tools! You could add the FX Expansion Pack, which offers a spring reverb tank and other goodies!
This is the boxed version. For the Eurorack version go here.
Use this panel to mount your Field Kit FX in your Eurorack System.
Please note: This order only includes the Eurorack Panel and Power Cable.
Its all about the things you connect to the Field Kit FX! To get you started we decided to offer an FX Expansion Pack with a bunch of handy cables, contact mic’s and a spring tank that you can use and connect to create your own signature sounds.
This is not the Expansion Pack for the original Field Kit, that one you find here!
7 Standard Eurorack Power Connectors (connect modules)
The new KOMA Case is ready for shipping! One case fits 84HP of modules, is 70mm deep and can be combined with other KOMA Cases to create larger setups using the Connector Packs and Standoff Sets. All KOMA Cases are shipped with a set of 4 rubber feet and 50 3MM scews (and excluding the blank panel in the photo).
Please note in your order if you wish a WHITE or BLACK Case!
Build your own modular synthesizer case with our KOMA case components. Choose up to four skiffs, connect the rows with KOMA’s connector packs, build it up with our standoffs and power them up with our Strom power system: Choose between our Strom and Strom+ bundle, throw in passive Strom modules with link connectors and busboards and you are ready to mount the modules of your choice and build a synthesizer of your dreams!
The KOMA Dual Discrete VCA offers two independent high quality VCA channels, both built up out of discrete transistor cells with low CV and audio bleed, very low noise and distortion. The VCA’s feature set also enables you to experiment with the linear/exponential response curve, changing the dynamics of your sound. Play around with the gain settings for creative distortion effects in the classic KOMA style:
High quality sound by default, noise by choice!
All the electricity you need to power up your modular setup with the Strom Modular Power line.
Please mark in your order which Plug type you would like to order: Europe, Japan, North America, United Kingdom or Australia!
KOMA STROM Bundle is a great cost-effective power solution for your Eurorack case. The Bundle pack includes a high-quality CINCON adapter, STROM power module and a flying bus board so you can get started immediately.
Please mark in your order which plug type you would like to order for the Power Brick: Europe, Japan, North America, United Kingdom or Australia!
KOMA STROM Busboard is a reliable bus board with an elegant black matte design and neon green status LED’s per rail. It includes jumpers for the CV/gate lines as well as the self-adhesive plastic standoffs. Includes a 34 cm connector cable to connect to the Strom active and passive modules.
STROM is a strong, reliable and slick power solution for your modular system. The STROM power modules were made with care for your system: it includes short-circuit protection and a replaceable fuse. STROM offers ultra low ripple on each rail, also under full load.
One active module can power multiple skiffs thanks to the STROM passive module distributing the power, which can be linked to an active, or another passive module with two link-connectors in the front of the system.
The STROM passive module distributes the power, which can be linked to an active, or another passive module with two link-connectors in the front of the module. Thanks to its minimalist slick design, it also looks great in your rack!
The STROM Passive Module comes with one 12,5 cm Link-Connector cable.
Read the Manual for the KOMA Elektronik STROM Power Solution.