STROM is a strong, reliable and slick power solution for your modular system. The STROM power modules were made with care for your system: it includes short-circuit protection and a replaceable fuse. STROM offers ultra low ripple on each rail, also under full load.
One active module can power multiple skiffs thanks to the STROM passive module distributing the power, which can be linked to an active, or another passive module with two link-connectors in the front of the system.
The STROM passive module distributes the power, which can be linked to an active, or another passive module with two link-connectors in the front of the module. Thanks to its minimalist slick design, it also looks great in your rack!
The STROM Passive Module comes with one 12,5 cm Link-Connector cable.
Read the Manual for the KOMA Elektronik STROM Power Solution.
The KOMA STROM+ Bundle is a great and cost effective power solution for your Eurorack case. The Bundle pack includes a high-quality CINCON adapter, STROM+ power module and a flying bus board. STROM + offers a current sensing technology so you have your consumption under control at all times!
STROM+ is a strong, reliable and slick power solution for your modular system. The STROM+ power module includes short-circuit protection and a replaceable fuse and ultra low ripple on each rail, also under full load. Unlike the basic STROM module, STROM + also offers a current sensing technology so you have your consumption under control at all times.
Set of 2 pcs 19″ rack ears, especially designed for the Komplex Sequencer, made of 1.5mm galvanized steel, with 2xM3 PEM nuts installed and powder coated RAL 9003.
This is an awesome addition to the Field Kit. Slide your finger over the Softpot and the voltage will increase and decrease. The Softpot has a hold function, so you can play it like a keyboard, outputting voltages that are very useful to control motors and casually search through the radio bands, or to control a hacked walkman!
The product consists of:
- Field Kit Linear Softpot Sensor
- 1 x Dupont 3 contact cable to connect the Sensorsto the Field Kit.
2x 1,5m long mono cables, with a big jack (6,3mm) on one end, and a small jack (3,5mm) on the other — perfect for patching between your modular system and mixer or other electronics!
2x 3m long mono cables, with a big jack (6,3mm) on one end, and a small jack (3,5mm) on the other — perfect for patching between your modular system and mixer or other electronics!
5 x 15 cm long 3,5mm mono patch cables for your modular system, available in classic KOMA black.
5 x 30 cm long 3,5mm mono patch cables for your modular system, available in classic KOMA black.
Used too much power in your STROM system? We’ve got you covered! Simply replace your fuse in your power supply with this one and you can continue making music!
Strom Mobile is a portable power solution for music makers and everyone who needs reliable voltage source at all times! The Strom Mobile transforms the output voltage of USB power banks (5V DC) to either 9V or 12V DC to power any (music) device running on those voltages. There are two independent channels which can output individually set voltages. The Strom Mobile includes an input current feedback system to save the user from exceeding the maximum output current of the USB powerbank in use.
To get the most out of the Strom Mobile we offer this pack which consists of:
- 1 x USB B cable (specifically designed version, to minimize voltage drop)
- 1 x 1-to-5 daisychain DC Cable,
- 2 x DC Cable
- 1 x polarity changing DC Cable (for instance to go from center negative to positive and visa versa)
Use this special USB B cable to connect your power banks to the Strom Mobile. We custom made this cable to prevent voltage drop when using power banks with the Strom Mobile.
Play with Motors, Sensors, Contact Microphones, Radiosignals! Our latest machine the Field Kit was funded through the community at Kickstarter and now available here on the KOMA website.
This is the assembled version of the Field Kit, for the DIY version, go here.