What are the specifications of the Mix Out CV input?

The Mix Out is a special output of the SVF-201 which contains all three of the outputs (LP, BP and HP). You can sweep continuously through these three outputs with a control voltage signal from 0 – 5V. The diagram below shows the corresponding loudness curves of the filter characteristics in correlation with the CV input. Low pass appears at 0.25V to 2.25V, pure bandpass between 2.25V and 2.75V and from 2.75V to 4.75 you’ll get high pass as an output signal. All outputs crossfade into each other.

The Mix Output has more internal gain than the three different single outputs, so signals taken from this output will have more overdrive / distortion than their respective partners. The signal levels themselves are identical though.

Posted in: SVF201 Questions